![]() ![]() Access the new removable drive detected and execute the PANLAB.EXE file.Plug the USB flash drive in a free USB 2.0 port of your computer and wait until Windows® installs it as a new removable drive.With proper administrative rights to install the software on an appropriate computer with proper specifications, please follow these steps: Please contact your IT staff before installing the software. The USB flash drive contains the software installation tool, the User Manual in PDF format and other components required to work in specific conditions.ĭue to security reasons of the Windows® operating system, a user with administrative rights is required to install the software and other components. RECORD-IT! MEDIA software is delivered within a single USB flash drive. This could result in the video not getting recorded or showing aberrant duration. If bandwidth bottlenecks occur, streaming video can show jitter, delay, or corruption. When working with IP Network cameras, the network infrastructure (LAN/WAN) and performance of your experimental facilities is an important point to be considered. O For recording video files from more than 4 cameras, the frame rate of the cameras should be set to low values (recommended value = 5 fps). O Two free USB 3.0 port are needed for the connection of 2 HUBs for 4 USB camera each. It is recommended to use a computer without the VIA chipset IMPORTANT: Issues may arise if using a computer with VIA chipsets in the PC motherboard. Screen text size must be set at 96 DPI (100%). Display: 1280 x 720 pixels and 32-bit true color.D: Drive SATA 3 6GB/s or faster, 500GB or greater.C: Drive SATA 2 3GB/s or faster, 250GB or greater.1 TB hard drive or superior (minimum 512 GB).Minimum computer specifications – up to 8 cameras O One free USB 3.0 port is needed for the connection of a HUB for 4 USB cameras. 1 Tb hard drive or superior (minimum 500 GB).Intel Core™ i7-6700 processor or superior (Celeron processor not supported).Minimum computer specifications – up to 4 cameras O One free USB 3.0 port is needed for the connection of the cameras (direct USB connection or through an analog/digital converter). O One free USB 2.0 port for the software USB flash key. It is recommended to use a computer without the VIA chipset. Display: 1024 x 768 pixels and 32-bit true color.1 TB hard drive or superior (minimum 500 GB).Intel Core™ i5-6700 processor or superior (Celeron processor not supported). ![]() Minimum computer specifications - 1 camera Here are some recommendations depending on the number of the cameras intended to be used with RECORD-IT! MEDIA. If the RECORD-IT! MEDIA is combined with another application, please also check the computer specifications for that application as well. The minimum computer specifications depend on the number of cameras, the specifications of the cameras and quality settings. Specific hardware and accessories, including but not limited to: cameras, camera support camera lens, video cables, and hubs, are not included and will need to be purchased separately. Videos generated by RECORD-IT! MEDIA can be easily integrated with the Panlab family of video-tracking products (Smart JUNIOR, Smart 3.0 and Smart IO) without any additional work. Both video recording and video playing can be synchronized with a third-party system (contact us for technical information). ![]() RECORD-IT! MEDIA provides a Player for the visualization of the recorded videos. Users select quality levels to optimize performance and minimize the hard disk space, if required. RECORD-IT! MEDIA can simultaneously record the live images of up to 8 cameras into independent digital video files. ![]() RECORD-IT! MEDIA is the Panlab product specifically designed to record digital videos in laboratories and scientific environments in general. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |